登陆  
最新更新时间:2016/11/10 11:20:00  访问数量:2999
赵小军
宝剑锋从磨砺出,梅花香自苦寒来!

个人简介
赵小军,男,1983年出生于湖南省耒阳市

博士,讲师

主要从事新型无机非金属材料和金属陶瓷复合材料的设计、制备及性能表征与微观机理的研究。先后参与了国家自然科学基金、国家重大专项、广东省重大科技专项等项目。已在Journal of the European Ceramic Society、Materials Science and Engineering A、Materials Science and Engineering B、Ceramics International、Materials and Manufacturing Processes、Materials and Corrosion等国内外知名学术刊物发表论文20多篇。

地址:湖南省长沙市岳麓区麓山南路932# 中南大学材料科学与工程学院

邮箱:zhaoxj@csu.edu.cn。

电话:0731-88877499

学习和工作经历

2013/7至今,中南大学材料科学与工程学院,讲师;

2008/9~2012/7,东北大学材料科学与冶金学院,材料学,工学博士学位;

2009/10-2010/10,加拿大瑞尔森大学(Ryerson University),机械与工业工程学院,联合培养博士;

2006/9~2008/7,东北大学材料科学与冶金学院,材料学,工学硕士学位;

2002/9~2006/7 ,东北大学材料科学与冶金学院,材料科学与工程,工学学士学位。


科研方向
_________________________________________________________________________________________
主要从事新型无机非金属材料和金属陶瓷复合材料的设计、制备、性能与微观机制的研究工作。

主要研究方向:陶瓷高温结构材料、难熔金属材料、超高温涂层材料、薄膜与多孔泡沫材料、硬质合金材料等。


学术成果
_________________________________________________________________________________________

学术论文:

[1] Y. F. Song, X. F. Ding, L. R. Xiao, X. J. Zhao*, Z. Y. Cai, Y. W. Li, Z. Z. Zheng, Effects of two-stage aging on the dimensional stability of Al-Cu-Mg alloy. Journal of Alloys and Compounds, 2017, 701: 508-514.

[2] L. Guo, L. R. Xiao, X. J. Zhao*, Y. F. Song, Z. Y. Cai, H. J. Wang, C. B. Liu, Preparation of WC/Co composite powders by electroless plating, Ceramics International, 2017, 43(5): 4076-4082..

[3] C. X. Yu, X. J. Zhao, L. R. Xiao, et al. Effect of carbon addition on the microstructure and mechanical properties of Nb-30Ti-18Al alloy, Materials Science and Engineering A, 2016, 666: 199-206.

[4] X J Zhao, L Guo, Z Y Cai, et al. SiC and ZrN Nano-Particulate Reinforced AlON Composites: Preparation, Mechanical Properties and Toughening Mechanisms, Ceramics International, 2016, 42 (5): 6072-6079.

[5] Y F Song, L R Xiao, X J Zhao, et al. Fabrication, microstructure and shear properties of Al foam sandwich. Materials and Manufacturing Processes, 2016, 31 (8): 1046-1051.

[6] Y H Wang, L R Xiao, X J Zhao, et al. Corrosion behavior of Zn-Cu-Ti and Zn-Cu-Ti-Mg alloys in Nacl solution, Materials and Corrosion, 2016, 67 (3): 297-304.

[7] Y H Wang, L R Xiao, X J Zhao, et al. Microstructure and mechanical properties of columnar-grained copper during cold-drawing, Materials Science and Engineering A, 2015, 639: 122-130.

[8] 胡炜,王彦红,赵小军,肖来荣,饶博,章玮. 热型连铸铝线的制备及组织性能研究. 有色金属学报,2015,25(7): 1882-1889.

[9] X J Zhao, L R Xiao, Z W Zhao, L Guo, H Q Ru, N Zhang, D L Chen. Fabrication and mechanical properties of silicon carbide-aluminum oxynitride nanocomposites, Ceramics International, 2014, 40 (9): 14295-14303.

[10] 曾德露,肖来荣,赵小军,王彦红. 铬对HAl77-2铝黄铜耐蚀性能的影响. 材料保护,2014,12.

[11] 刘峤,肖来荣,张宏领,曾德露,王彦红,赵小军. 稀土La对2024铝合金铸态组织的影响. 矿冶工程,2014, 34 (5): 134-136.

[12] X J Zhao, H Q Ru, N Zhang, et.al. Corrosion of aluminum oxynitride based ceramics by molten steel. Ceramics International, 2013, 39 (3): 3049-3054.

[13] N Zhang, X J Zhao, H Q Ru, et al. Thermal shock behavior of nano-sized ZrN particulate reinforced AlON composites, Ceramics International, 2013, 39 (1): 367-375.

[14] N Zhang, B Liang, X J Zhao, et al. Effect of polyacrylic acid addition on rheology of SiC-Al2O3-ZrO2 (3Y) mixed suspensions, International Journal of Applied Ceramic Technology, 2013, 10 (3): 502-508.

[15] X J Zhao, N Zhang, H Q Ru, et al. Mechanical properties and toughening mechanisms of silicon carbide nano-particulate reinforced Alon composites, Materials Science and Engineering A, 2012, 538: 118-124.

[16] X J Zhao, H Q Ru, D L Chen, et.al. Thermal shock behavior of nano-sized SiC particulate reinforced AlON composites, Materials Science and Engineering B, 2012, 177 (5): 402-410.

[17] N Zhang, X Y Cui, X J Zhao, et al. Preparation of nanometer carbon spheres by hydrothermal synthesis method, Key Engineering Materials, 2012, 512-515: 257-260.

[18] X J Zhao, D L Chen, H Q Ru, et.al. Oxidation behaviour of nano-sized SiC particulate reinforced Alon composites, Journal of the European Ceramic Society, 2011, 31 (13): 2255-2265.

[19] X J Zhao, D L Chen, H Q Ru, et.al. Zirconium nitride nano-particulate reinforced Alon composites: fabrication, mechanical properties and toughening mechanisms, Journal of the European Ceramic Society, 2011, 31 (5): 883-892.

[20] N Zhang, B Liang, X Y Wang, H M Kan, X J Zhao. The pressureless sintering and mechanical properties of AlON ceramic, Materials Science and Engineering A, 2011, 528 (19-20): 6259-6262.

[21] X J Zhao, H Q Ru, N Zhang, et al. Hot-pressing sintering behavior and properties of AlON/SiC composites, Advanced Materials Research, 2010, 105-106: 184-187.

[22] 赵小军,茹红强,张宁,等. AlON粉体的合成,稀有金属材料与工程,2009,38:78-81.

[23] 张宁,赵小军,茹红强,等. 一步常压烧结制备AlON陶瓷材料,稀有金属材料与工程,2009,38:194-197.

专利:

[1] 肖来荣, 赵小军, 郭蕾等. 一种超细WC粉体的分散方法. 2016, 中国, 20140680394.X.

[2] 肖来荣, 李刚, 曲伯麟, 周皓, 沈统, 赵小军. 一种废杂铜复合精炼剂及其制备方法和应用, 2016, 中国, ZL201410799138.2.

[3] 张宁,赵小军. 氮化锆增强氧氮化铝复合陶瓷材料的制备方法, 2016, 中国, ZL201010563397.7.