登陆  
最新更新时间:2017/2/27 13:48:00  访问数量:4040
周海涛

个人简介
周海涛, 男,山东人,留学人员,博士学位/ 教授, 博导,研究方向金属材料工程(压力加工)。

教育经历

1978.9-1982.7 在东北大学金属压力加工专业攻读学士学位;

1984.9-1986.12 在东北大学金属压力加工专业攻读硕士学位;

1992.9-1994.9在加拿大麦吉尔(McGill大学材料科学与工程系公派留学;

2001.9-2004.7 在上海交通大学材料科学与工程学院攻读博士学位;

工作经历

1982.7-1984.9济南第四机床厂从事材料成形,任助理工程师;

1983.1-1996.12山东冶金设计研究院从事材料工艺设计与研究,任工程师(1988)。

1997.1-2001.9山东省工程设计研究院从事冶金与材料设计与研究,任高级工程师,院长。

2004..09-至今 在中南大学材料学院从事教学和科研工作(人才引进),任教授./博导


讲授课程
_________________________________________________________________________________________
本科生课程

1、金属塑性加工技术;

2、材料成形过程装备与控制;

研究生课程

3、先进铸造工艺学;


科研方向
_________________________________________________________________________________________

发表的论文及专利

[1] H. T. Zhou Influence of high pressure during solidification on the microstructure and strength of Mg-Zn-Y alloys,JOURNAL OF RARE EARTHS,2016

[2] H. T. Zhou , A study of automobile brake bracket formed by casting-forging integrated forming technology MATERIALS & DESIGN, 2015

[3] H. T. Zhou ,Effects of homogenization treatment on the microstructure and mechanical properties of Mg-8Li-3Al-Y alloy MATERIALS & DESIGN 2015

[4] H.T. Zhou , Q.Z. Peng , H.X. Yang c, X. ZhouDynamic recrystallization during hot deformation of GH690 alloy:A study using processing maps, Journal of Nuclear Materials 448 (2014) 153162

[5] H T Zhou, R R Liu, Z C Liu, X Zhou, Q Z Peng, F H Zhong and Y Peng. Hot Deformation Characteristics of GH625 and Development of a Processing Map,Journal of Materials Engineering and Performance,2013(22), 2515-2521

[6] Zhou Xiao, Zhou Haitao, Liu Ruirui, Zhou Yong, A study of non-isothermal primary crystallization kinetics and soft magnetic property of Co65Fe4Ni2Si15B14 amorphous alloy, JOURNAL OF ALLOYS AND COMPOUNDS, 2012,539:210-214

[7] H.T. Zhou, Q.B. Li, Z.K. Zhao, Z.C. Liu, S.F. Wen, Q.D. Wang. Hot workability characteristics of magnesium alloy AZ80-A study using processing map. Materials Science and Engineering A, 527 (2010) 2022-2026.

[8] K.M. Liu, H.T. Zhou, B. Yang, D.P. Lu, A. Atrens. Influence of Si on glass forming ability and properties of the bulk amorphous alloy Mg60Cu30Y10. Materials Science and Engineering A, 527 (2010) 7475-7479.

[9] H.T. Zhou, Z.K. Zhao, X. Zhou, B. Yan, J.W. Zhong, Q.B.Li. The peculiarities of the nanocrystallization process and copper addition effects for an amorphous Fe75.5Si13.5B9Cu2 alloy. Journal of Alloys and Compounds, 475 (2009) 706–711.

[10] H.T. Zhou, Z.D. Zhang, C.M. Liu, Q.W. Wang. Effect of Nd and Y on the microstructure and mechanical properties of ZK60 alloy Materials Science and Engineering A, 445-446 (2007) 1-6.

[11] H.T. Zhou, J.W. Zhong, X. Zhou, Z.K. Zhao, Q.B. Li. Microstructure and properties of Cu-1.0Cr-0.2Zr-0.03Fe alloy. Materials Science and Engineering A, 498 (2008) 225-230.

[12] JIANG Yong-feng, ZHOU Hai-tao, ZENG Su-min. Microstructure and properties of oxalate conversion coating on AZ91D magnesium alloy. Trans. Nonferrous Met. Soc. China, 19(2009) 1416-1422

[13] Zhou Haitao, Jiang Yong-feng, Zhong Jian-wei, Zhao Zhong-kai, Li Qing-bo. High strain rate superplasticity of AZ31 alloy. Trans. Nonferrous Met. Soc. China, 17 (2007) s1 409-412.

[14] Haitao Zhou ,Zhendong Zhang, Dymamic recrystallization of Mg-6Zn-0.5Zr-Nd alloy, Mater. Sci. and Technol 23(6)(2007)657.

[15] Haitao Zhou, A constitutive Model Development and Hot Extrusion Simulation for AZ61 alloy, Mater. Sci. and Technol 22 (2006) 597.

[16] H.T. Zhou, Materials Science and Engineering: A, Volume 527, Issues 7-8, 25 March 2010, Pages 2022-2026

[17] H.T.Zhou ,The nanocrystallization process and copper addition effectsfor an amorphous Fe75.5Si13.5B9Cu2 alloy,Journal of Alloys and Compounds,475 (1-2)(2009)706-711

[18] H.T.Zhou ,Microstructure and properties of Cu-Cr-Zr ,Mater. Eng. And Engineering A, 498 (2008)225

[19] H.T.Zhou, Effects of Y and Nd on the microstructure and properties of ZK60 alloy, Mater. Eng. And Engineering A ,445-446(2007)p1-6.

[20] Haitao Zhou ,Zhendong Zhang, Dymamic recrystallization of Mg-6Zn-0.5Zr-Nd alloy, Mater. Sci. and Technol 23(6)(2007)657.

[21] Haitao Zhou, A constitutive Model Development and Hot Extrusion Simulation for AZ61 alloy, Mater. Sci. and Technol 22 (2006) 597.

[22] Haitao Zhou, Microstructural evolution of AZ61 magnesium alloy, Mater. Sci. and Technol 20 (2004)1937.

[23] Haitao Zhou, Effect of Ce on microstructures and tensile properties of AZ61 magnesium alloy, J. of Materials Science ,2004, 7061

[24] ZHOU haitao, Strain Softening and Hardening Behavior in AZ61 Magnesium Alloy, Journal of Material Science &Technology 6 (2004) 691

[25] Haitao Zhou, Flow Stress Model Development and Hot Extrusion Simulation for Liquidus Casting ZK60 Magnesium Alloy, International Numerical Methods in Industrial Forming Processes June, 2004, Columbus, ohio, U.S.A , p 1134.

[26] Haitao Zhou, Hot mpression behavior ZK60 magnesium alloy, Materials Forum, 488-489 (2004)563.

[27] H. T. Zhou, Grain refinement of AZ61 magnesium alloy, Magnesium technology (TMS), JOM, v 56, n 11, November, 2004, p99.

[28] Haitao Zhou, A flow stress model for magnesium alloy of AZ61 alloy, Acta. Metal. Sinica ,17 (2004) 155

[29] ZHOU Hai-tao, Flow stress and microstructure evolution in as rolled AZ91 alloy during hot deformation, Trans. Nonferrous Met. Soc. China. 2003,13(6)1266.

[30] ZHOU Hai-tao, Effect of La and Nd on microstructures and mechanical properties of AZ61 wrought magnesium alloy, Trans.Nonferrous. Met. Soc. China, 2004,14 (1):68-70 .

[31] Haitao Zhou ,Dynamic recrystallization behaviors of AZ61 magnesium alloy, Trans. Nonferrous Met. Soc. China 2005,15 (5) 1055.

[32] Haitao Zhou ,High strain rate superplacity of AZ31 magnesium alloy, Trans. Nonferrous Met. Soc. China 2007 (16)747-752

[33] H.T.Zhou, Hot deformation behaviors of ZK60-Nd alloy, Magnesium technology (TMS), P504,Mar, 2006

[34] H.T.Zhou, The microstructures and tensile properties of AZ61-Re magnesium alloy, Magnesium technology (TMS), P511,Mar, 2006

[35] Haitao Zhou, Hot mpression behavior ZK60 magnesium alloy, Materials Forum, 488-489 (2004)563. (Sci

[36] JIANG Yong-feng, ZHOU Hai-tao,ZENG Su-min, Microstructure and properties of oxalate conversion coating on AZ91D magnesium alloy Nonferrous Met. Soc. China 19(2009)(6

[37] Yong-feng Jiang, Hai-tao Zhou and Su-min ZengOxalate conversion-coating on AZ91D magnesium alloy, Advances in Materials Science and Engineering,submitted.

[38] 周海涛, 温盛发, 刘克明, 刘志超, 李庆波. 添加银对大变形Cu-14Fe原位复合材料性能的影响. 材料工程, 2011, (3): 40-44.

[39] 刘克明, 周海涛, 陆德平, 杨滨, 曾苏民. 纳米压痕法研究SiMg60Cu30Y10非晶合金的影响. 稀有金属材料与工程, 2010, 39(10): 1732-1736.

[40] 刘克明, 周海涛, 陆德平, Andrej Atrens, 邹晋, 陈志宝, 谢仕芳. 微量Ag对形变Cu-Fe原位复合材料组织和性能的影响. 材料热处理学报, 2010, 31(6): 62-67.

[41] 李庆波, 周海涛, 刘志超, 温盛发. AZ80镁合金变形特性及管材挤压数值模拟研究. 《热加工工艺》, 2010, 39(5): 31-34.

[42] 温盛发, 周海涛, 刘克明, 刘志超. Cu-1.0Cr-0.2Zr 合金的时效析出研究. 《热加工工艺》, 2010, 39(12): 113-116.

[43] 刘志超, 周海涛, 李庆波, 温盛发. GH625合金的热变形行为. 《热加工工艺》, 2010, 39(12): 31-34.

[44] 钟建伟,周海涛,周啸,赵仲恺,李庆波. 多级形变时效对Cu-Cr-Zr 合金组织与性能的影响. 材料热处理学报,2009, 30(3): 155-159.

[45] 李庆波, 周海涛, 钟建伟, 赵仲恺, 王孟君. Mg-9Y-3Zn-0.5Zr 合金的热变形行为. 中国有色金属学报, 2008, 18(6): 1013-1018.

[46] 李庆波, 周海涛, 赵仲恺, 钟建伟, 王经涛. Mg-Y-Zn-Zr合金的显微组织和力学性能. 中南大学学报, 2009, 40(3): 651-656.

[47] 赵仲恺, 周海涛, 蒋永锋, 李庆波, 刘志超, 温盛发. 非晶软磁合金C065Fe4Ni2Sil5B14的纳米晶化动力学研究. 材料导报, 2009 23(12): 14-16.

[48] 蒋永锋, 周海涛, 曾苏民. 镁合金表面草酸盐化学转化膜的性能. 材料保护, 2009, 42(9): 11-15.

[49] 蒋永锋, 周海涛, 曾苏民. 镁合金表面草酸盐化学转化膜的性能研究. 电镀与涂饰, 2009, 28(11): 26-28.

[50] 蒋永锋, 周海涛, 曾苏民. 镁合金表面陶瓷/铜复合膜层的性能研究. 表面技术, 2009, 38(3): 2-3.

[51] 李庆波, 周海涛, 蒋永峰, 赵仲恺, 刘志超, 温盛发. 加工图的理论研究现状与展望. 有色冶金设计与研究, 2009, 30(4): 2-6.

[52] 赵仲恺, 周海涛, 周啸, 严彪, 钟建伟, 李庆波. 熔体快淬非晶Fe-Si-B-Cu合金的晶化行为. 中国有色金属学报, 2008, 18(10): 1873-1878.

[53] 钟建伟, 周海涛, 赵仲恺, 李庆波, 周啸. 形变热处理对Cu-Cr-Zr合金时效组织和性能的影响. 中国有色金属学报, 2008, 18(6): 1033-1037.

[54] 周海涛, 稀土元素铈对AZ61镁合金铸态显微结构的影响, 高技术通讯, 2003, (1 ):53-56.(EI收录) .

[55] 周海涛, 稀土铈对AZ61变形镁合金组织和力学性能的影响, 中国有色金属学报, 2004,14(1):100-104 (核心)

[56] 周海涛,热轧工艺参数对ULCB转变行为和显微结构的影响,上海交通大学学报, 38 (7) (2004) 1091. (Ei

[57] 周海涛,变形镁合金材料的研究进展, 材料导报, 2003,17 (11):16-18(核心).

[58] 周海涛, AZ31镁合金型材挤压工艺和组织性能分析, 轻合金加工技术,2003, 31(9):28-30.

[59] 周海涛, AZ61合金热变形行为的研究,材料科学与工程新进展,2002,641.

[60] 周海涛 ,供应商信用等级指标体系的构建与评判,系统工程理论与实践,2003, 4 (核心).

[61] 李庆波,周海涛,赵仲恺,钟建伟, 王经涛. 稀土Y对Mg-Zn-Zr合金组织和力学性能的影响.中南大学学报.2009,40(3):650-656

[62] 周海涛, 钟建伟, 周啸, 赵仲恺, 李庆波. 多级形变时效对Cu2Cr2Zr 合金组织和性能的影响.材料热处理学报, 2009, 30(6):141-145.

[63] 蒋永锋,周海涛,曾苏民,镁合金表面陶瓷/铜复合膜层的性能研究,表面技术2009 年38卷 第3 期In press.

[64]刘志超 周海涛 李庆波 温盛发 赵仲恺 GH625合金的热变形行为 材料工程

[65] 镁合金相图,第三作者,中南大学出版社、2006.12

发明专利

1、 200710192654.9 镁合金表面化学转化膜处理溶液

2、201410011545.2 综合利用酸洗污泥提取贵金属之后剩余尾渣的方法

3、201410505805.1 一种高强双相超轻的镁锂合金及其制备方法

4、201510004478.6 一种活塞式内燃机中活塞环用精密合金及其制备方法

5、201610246982.1 一种超轻双相镁锂合金板材的制备工艺

6、201110158174.7 一种钙锭熔炼浇注系统及制备金属钙锭的方法